Aim-TTi

Located in Huntingdon, UK, TTi (Thurlby Thandar Instruments) is a leading manufacturer of electronic test and measurement instruments and is one of the world’s major producers of laboratory power supplies (PSUs). Its sister company, Aim Instruments, also produces electronic instruments. The portfolio of products from the two companies is grouped under the overall banner of Aim-TTi.
The company is also a world leader in waveform generation, with products ranging from basic analog function generators to advanced multi-channel arbitrary generators. As well, it designs and manufactures instruments for the precision measurement of all of the fundamental electronic parameters including voltage, current, resistance, capacitance, inductance, power and frequency. The Aim-TTi Factory_tmetrix
Aim-TTi has developed lower-cost alternatives for essential RF tools required by engineers such as signal generators and spectrum analyzers. Most countries have now implemented legislation requiring products to comply with standards for radiated and conducted emissions. It has produced equipment capable of compliance quality measurements, enabling users to self-certify for current harmonics and flicker.

Showing 1–12 of 14 results


  • Multi-Range DC Power Supply Triple Outputs, 3 x 35V/3A 315W, No Interfaces

    • Three or four independent and full performance outputs
    • Simultaneous display of meters and settings for all outputs
    • Instant access to voltage/current setting for any output
    • Multiple ranges on each output for wider voltage/current choice
    • Instant individual on/off control plus sequencable multi on/of
    • Up to 250 settings memories for individual or multiple outputs

     

  • with analogue and digital control, USB, RS232, LAN (LXI) and GPIB

    • Versatile solution for direct testing of dc power sources and PFCs
    • Constant current, resistance, conductance and power modes
    • Wide voltage and current range, 10 to 500V and 0 to 16A
    • 400 watts continuous dissipation at 28°C (360W at 40°C)
    • High resolution and accuracy for level setting
    • Built-in transient generator with variable slew
    • Current monitor output for waveform viewing
    • Variable drop-out voltage for battery testing
    • High resolution backlit graphic LCD with soft key control
    • Analogue remote control of levels and TTL control of on/off and transient switching
    • Front and rear input terminals
    • Load inputs rated to CAT II (300V)
    • Full bus control via USB, RS232, GPIB and LXI compliant LAN interfaces

     

  • with analogue and digital control, USB, RS232, LAN (LXI) and GPIB

    • Versatile solution for direct testing of dc power sources and PFCs
    • Constant current, resistance, conductance and power modes
    • Wide voltage and current range, 10 to 500V and 0 to 16A
    • 400 watts continuous dissipation at 28°C (360W at 40°C)
    • High resolution and accuracy for level setting
    • Built-in transient generator with variable slew
    • Current monitor output for waveform viewing
    • Variable drop-out voltage for battery testing
    • High resolution backlit graphic LCD with soft key control
    • Analogue remote control of levels and TTL control of on/off and transient switching
    • Front and rear input terminals
    • Load inputs rated to CAT II (300V)
    • Full bus control via USB, RS232, GPIB and LXI compliant LAN interfaces

     

    • Multiple ranges on each output for wider voltage/current choice
    • Four independent 105W full performance outputs
    • Instant individual on/off control plus sequencable multi on/off
    • Simultaneous display of meters and settings for all outputs
    • Up to 250 settings memories for individual or multiple outputs
    • Instant access to voltage/current setting for any output
    • USB, RS-232, LXI compliant LAN, and GPIB* interfaces (P versions)
    • USB, RS-232, LXI compliant LAN, and GPIB* interfaces (P versions)
      Duplicate power and sense terminals at rear (P versions)

     

  • Bench/System DC Power Supplies, PowerFlex or PowerFlex+ regulated Single or Dual Outputs 1200 watts, with/without Digital Remote Interfaces
    • Single or dual outputs, 1200 watts total
    • PowerFlex design gives variable voltage/current combinations within a power envelope
    • Up to 60 volts or 80 volts and up to 50 amps
    • Setting by direct numeric entry or by spin wheel
    • High setting resolution of 1mV in up to 60 volts
    • Low noise of < 3mV rms at full power
    • Bench or rack mounting, front and rear terminals
    • Quasi analogue remote control
    • RS232, USB GPIB & LAN interfaces (P models)

     

  • Bench/System DC Power Supply, PowerFlex Regulation, Smart Analog Controls Single or Dual Outputs, 360 to 840 watts, with/without Remote Interfaces
    • PowerFlex design gives variable voltage and current combinations within a maximum power range
    • Up to 60 volts and up to 20 amps
    • 180 watts or 420 watts maximum per output
    • Isolated outputs can be wired in series or parallel
    • Constant voltage or constant current operation
    • Settings Locking (S-Lock)
    • PowerFlex or fixed-range operation
    • Variable OVP trips
    • Selectable remote sense terminals
    • Compact quarter or half rack 3U case size
    • Isolated analogue remote control (CPX400SA only)
    • RS232, USB, GPIB & LXI compliant LAN (P models only)

     

  • Bench/System DC Power Supply, Multi-Range, Digital Control Triple Outputs, 315 or 378W with/without Remote Interfaces
    • Three high performance outputs each with full functionality
    • Range switching gives variable voltage/current combinations
    • Shared power mode provides double power from a single output
    • Low output noise and ripple via linear final regulation
    • High setting resolution of up to 1mV and 0.1mA
    • Variable OVP and OCP trips on all outputs
    • 50 setting memories per output plus 50 linked memories
    • Selectable voltage tracking (isolated tracking)
    • Selectable current meter averaging
    • Switchable remote sense capability
    • Graphic LCD provides simultaneous output metering
    • Numeric or spin-wheel control of all parameters
    • Individual or combined output on/off control with
    • programmable delay sequencing.
    • 3U half-rack case for bench or rack mounting
    • GPIB, RS-232, USB and LAN (LXI) interfaces (-P models)
    • Duplicate power & sense terminals at rear (-P models)

    MX100T and MX100TP:

    • 315 watts total power
    • Three outputs of equal power, each capable of 35V at 3A
    • Range switching provides up to 70 volts and up to 6 amps

    MX180T and MX180TP:

    • 375 watts plus of total power
    • Two high power outputs plus one low power output
    • High power outputs each capable of 30 volts at 6 amps
    • Range switching provides up to 120 volts or up to 20 amps
    • Low power output provides up to 12 volts or up to 3 amps

     

  • Bench/System DC Power Supply, Single Output, Mixed-mode Regulation up to 360 watts, with/without remote interfaces
    • Compact & lightweight power supply
    • 0 to 18V at 0 to 20A or 0 to 35V at 0 to 10A
    • Bench or rack mounting, front & rear terminals
    • Very low noise, excellent transient response
    • Comprehensive protection including OVP trip
    • High setting resolution, remote sense terminals
    • Analogue controls

    P versions add:

    • RS-232 and GPIB interfaces as standard
    • Keyboard setting of all parameters
    • Rotary and delta (step) control of V and I
    • Watts display, non-volatile storage of 25 settings
    • Fully programmable with bus readback of V & I

     

  • Bench/System High Precision DC Power Supply, Linear Regulation, Digital Control Single or Triple Outputs, 105 to 242 watts, with/without Remote Interfaces
    • Advanced dc power supplies, single or triple output
    • Up to 112 watts per output
    • Very high precision, very low noise, excellent dynamics
    • Advanced user interface with numeric and rotary control
    • Multiple voltage/current ranges for increased flexibility
    • Multiple non-volatile memories for power supply set-ups
    • Switchable remote sense provides perfect load regulation
    • Comprehensive protection including OVP and OCP trips
    • Compact bench footprint; modular width for rack mounting
    • Auxiliary output fully variable 1.00V to 6.00V at 3A with selectable voltage and current metering (T models)
    • Bus programmable via USB, RS232, GPIB or LAN (P models)
    • LAN interface is LXI compliant
    • Duplicate power and sense terminals at rear (P models)

     

  • Bench/System Higher Voltage DC Power Supply, Linear Regulation Single Output 90 watts, 120V or 250V, with/without Remote Interfaces
    • Single output 120V 90W or 250V 94W
    • Linear regulation – for the best performance
    • Ultra-compact design – uses up less space
    • True Analogue controls – for ease of use
    • S-Lock function – instantly lock settings
    • V-Span function – customize the voltage range
    • Low current range and current meter averaging
    • DC output switches and “view limits” button
    • Selectable remote sense terminals

    P versions add:

    • Full digital remote control and readback
    • RS-232, USB and LAN (Ethernet), GPIB optional
    • LAN Interface conforms with LXI standard
    • IVI Driver supplied
    • Interfaces are opto-isolated from outputs
    • Isolated Analogue remote control of V and I
    • Front and rear terminals

     

  • Bench System DC Power Supply, Linear Regulation, Smart Analog Controls Single, Dual or Triple Outputs, 48 to 242 watts, with/without Remote Interfaces
    • Single, dual or triple output models
    • Models from 6V/8A up to 60V/1.5A
    • Linear regulation – for the best performance
    • Ultra-compact design – uses up less space
    • True Analogue controls – for ease of use
    • S-Lock function – instantly lock settings
    • V-Span function – customize the voltage range
    • Low current range and current meter averaging
    • DC output switches and “view limits” button
    • Selectable remote sense terminals
    • Independent, Isolated Tracking, Ratio Tracking  and True Parallel modes on dual & triple models
    • High current low voltage output on triple output model
    • RS-232, USB and LAN (Ethernet), GPIB optional (P models)
    • LAN Interface conforms with LXI standard (P models)
    • Analogue remote control of V and I (single output P models)
    • Front and rear terminals (P models)

     

  • Bench DC Power Supply, Mixed-mode Regulation, Analog Controls Single, Dual or Triple Outputs, 175 to 420 watts

     

    • Single outputs, 35V/5A, 18V/10A, 42V/10A, 20V/20A
    • Dual or triple outputs, 35V/4A
    • Independent digital voltage and current meters for each output with 4 digit resolution
    • Switchable local or remote sensing
    • Constant voltage or constant current operation
    • Variable 1.5 – 5.0V auxiliary output at 5A (EX354RT)
    • Compact design uses less bench space
    • Silent fan-free cooling (not EX202R/EX4210R)
    • DC output switches, automatic mode indication
    • RS232 or USB controlled models available (35V/5A single)
    • Multi-mode dual model 2x(75V/2A) or 75V/4A or 150V/2A

     


Showing 1–12 of 14 results