RF SHBD sensor measures static DC magnetic B fields

AR is announcing the introduction of three new additions to the RF Safety Products line.

Posted on by Mihir Mehta
Image result for SM40G

SM40G

SM400K

SM400K

The SHBD sensor measures static (DC) magnetic B-fields.   This sensor can be used with both the SM400K and SM40K RF Safety Meters.  See the attached SHBD Product Announcement for further details regarding the introduction of the SHBD sensor. The data sheet for the SHBD sensor is also attached, as are the data sheets for the SM400K and SM40G RF Safety Meters. RF SHBD sensor measures static DC magnetic B fields

The SHMD400K is a unique combination sensor, and is capable of measuring either the E-field and B-field up to 400kHz, or the static (DC) H-field; the desired sensor type can be selected using a switch at the base of the sensor head.  The SHMD400K is sold only in conjunction with the purchase of an SM400K RF safety meter (SM400KM2).  See the attached SHMD400K Product Announcement for further details.  The data sheet for the SHMD400K is also attached.RF SHBD sensor measures static DC magnetic B fields

The SHMD20K is a similarly unique combination sensor, and is capable of measuring either the E-field and B-field up to 20kHz, or the static (DC) H-field.  As with the SHMD400K, the desired sensor type can be selected using a switch at the base of the sensor head.  The SHMD20K is sold only in conjunction with the purchase of either an SM400K RF Safety Meter (SM400KM1) or SM40G RF Safety Meter (SM40GM1).  See the attached SHMD20K Product Announcement for further details.  The data sheet for the SHMD20K is also attached.

Please contact ACA TMetrix, if you have any questions, or require additional information about these new RF Safety Products.

Kindest regards, 

Tom Eichelberger                          

General Sales Manager

AR RF/Microwave Instrumentation

 

 

 For more information Contact 

 

 

Address : 5805 Kennedy Road, Mississauga, Ontario.
L4Z 2G3 Phone: 1-800-665-7301
Fax: 1-905-890-1959
Email: [email protected]

e

 RF SHBD sensor measures static DC magnetic B fields
Hioki HPK3 Contractors Kit

Hioki HPK3 Contractors Kit

Posted on by Mihir Mehta

Hioki HPK3 Contractors Kit

Different items to aide the user with Hioki HPK3 Contractors Kit
Included in Kit:

  • Voltage detector 3120 – on-Metallic Contact Voltage Detector with Battery Life Indicator that promotes safety on the worksite.
  • AC Current Clamp Meter 3280-10F with Broad Operating Temperature Range, Attachable Flexible Sensor, and Drop-Proof Durability
  • Non-contact Infrared Thermometer FT3700 – 20 Sharply Focus on Measurement Spots with Two-Beam Laser Marker, Ideal for HVAC Applications
  • Digital Multimeter DT4255 with Fuse-protected Terminals Ideal for Harsh Work Environments
  • Phase Rotation Meter  PD 3129-10 with Easy-to-Read Arrow and Non-Metallic Contact Clips for 70V to 1000V Lines
  • Digital Insulation Tester IR4056with Continuity Check, 5-Range, 50 to 1000V

HPK3 Pro Kit

Item

Part#

Qty

Phase Rotation Meter

3129-10 1

Insulation Meter

 IR4056-20 1

Volt Detector

 3120 1

AC Clamp Meter

 3280-10 1

Infrared Thermometer (IR) Gun

 FT3700-20 1

Digital Mutimeter (DMM)

 DT4255 1

Carrying Case

 Case for HPK 3 1
 AC CLAMP METER 3280-10F

HIOKI AC CLAMP METER 3280-10F

  • Measure the fundamental waveform component using the average rectified method
  • Expanded -25 °C to 65 °C operating temperature range
  • Connect the CT6280 flexible sensor to measure up to 4199 A in thick or paired wires
  • Drop proof design withstands drop from a height of 1 meter
 VOLTAGE DETECTOR 3120

HIOKI VOLTAGE DETECTOR 3120

  • Top “primary supply level” safety class rating for voltage detectors
  • CAT IV 1000 V design meets CE Mark qualifications
  • Continuously indicate battery status with green indicator lamp
  • Both visual and audible voltage detection indication
  • Automatic power switching prevents battery discharge

HIOKI INFRARED THERMOMETER FT3700 – 20

  • Pistol design with easy-to-see display
  • A full menu of basic measuring functions
  • Easily test in difficult locations, moving objects or where there is danger of electric shock
  

HIOKI DIGITAL MULTIMETER DT4255

  • Maximum safety in the field by absolutely preventing short-circuit accidents with fused measurement terminals and current-limiting resistor
  • ±0.3% DC V basic accuracy, wide 40 Hz to 1 kHz AC V frequency characteristics
  • Low-pass filter (100 Hz/ 500 Hz) cuts high harmonics (when measuring inverter fundamental waveforms)
  • Connect to PC with USB communication function (optional)
  • Broad -25°C (-13°F) to 65°C (149°F) operating temperature range CAT IV 600 V, CAT III 1000 V.

PHASE DETECTOR PD3129

HIOKI PHASE DETECTOR PD3129

  • Simply clip clamps onto wire insulation
  • Green LED arrow clearly shows phase direction, perfect for visual reports
  • Rotating LED indicator shows the phase sequence for a 3-phase power supply at a glance
  • Intermittent beeps signal positive phase; continuous tone signals reverse phase
  • Magnetic base allows the instrument to be secured on a distribution panel
  INSULATION TESTER IR4056

HIOKI INSULATION TESTER IR4056

  • 5-range testing voltage of 50 V/100 MΩ to 1000 V/4000 MΩ
  • Stable & medium-speed digital readings, 0.8 second response time of PASS/ FAIL decisions
  • Drop proof onto concrete from 1m (3.28 feet)
  • Bright LED, luminous LCD, test lead with bright LED lamp to illuminate near hand (Also available in the IR4056-21)
  • Continuity check via 200 mA testing
  • Built in AC/DC voltage meter, useful for testing solar power generation systems and electric vehicles

RELATED PRODUCT 

Hioki HPK-1 Pro Kit

Hioki HPK-1 Contractors Kit

Hioki HPK-1 Pro Kit Different items to aide the user with Hioki HPK-1 Kit Included in Kit: Voltage detector 3120 – on-Metallic Contact Voltage Detector with Battery Life Indicator that promotes safety on the worksite. AC Current Clamp Meter 3280-10F with Broad Operating Temperature Range, Attachable Flexible Sensor, and Drop-Proof Durability Non-contact Infrared Thermometer FT3700 – […]
Hioki HPK3 Contractors Kit
Hioki HPK-1 Pro Kit

Hioki HPK-1 Contractors Kit

Posted on by Mihir Mehta

Hioki HPK-1 Pro Kit

Different items to aide the user with Hioki HPK-1 Kit
Included in Kit:Hioki HPK-1 Contractors Kit

    • Voltage detector 3120 – on-Metallic Contact Voltage Detector with Battery Life Indicator that promotes safety on the worksite.
    • AC Current Clamp Meter 3280-10F with Broad Operating Temperature Range, Attachable Flexible Sensor, and Drop-Proof Durability
    • Non-contact Infrared Thermometer FT3700 – 20 Sharply Focus on Measurement Spots with Two-Beam Laser Marker, Ideal for HVAC Applications
    • Digital Multimeter DT4255 with Fuse-protected Terminals Ideal for Harsh Work Environments

HPK1 Pro Kit

Item

Part#

Qty

Volt Detector

 3120 1

AC Clamp Meter

 3280-10 1

Infrared Thermometer (IR) Gun

 FT3700-20 1

Digital Mutimeter (DMM)

 DT4255 1

Carrying Case

 Case for HPK1 1
VOLTAGE DETECTOR 3120

HIOKI VOLTAGE DETECTOR 3120

  • Top “primary supply level” safety class rating for voltage detectors
  • CAT IV 1000 V design meets CE Mark qualifications
  • Continuously indicate battery status with green indicator lamp
  • Both visual and audible voltage detection indication
  • Automatic power switching prevents battery discharge
  AC CLAMP METER 3280-10F

HIOKI AC CLAMP METER 3280-10F

  • Measure the fundamental waveform component using the average rectified method
  • Expanded -25 °C to 65 °C operating temperature range
  • Connect the CT6280 flexible sensor to measure up to 4199 A in thick or paired wires
  • Drop proof design withstands drop from a height of 1 meter

HIOKI INFRARED THERMOMETER FT3700 – 20

  • Pistol design with easy-to-see display
  • A full menu of basic measuring functions
  • Easily test in difficult locations, moving objects or where there is danger of electric shock
  

HIOKI DIGITAL MULTIMETER DT4255

 

  • Maximum safety in the field by absolutely preventing short-circuit accidents with fused measurement terminals and current-limiting resistor
  • ±0.3% DC V basic accuracy, wide 40 Hz to 1 kHz AC V frequency characteristics
  • Low-pass filter (100 Hz/ 500 Hz) cuts high harmonics (when measuring inverter fundamental waveforms)
  • Connect to PC with USB communication function (optional)
  • Broad -25°C (-13°F) to 65°C (149°F) operating temperature range CAT IV 600 V, CAT III 1000 V.

RELATED PRODUCT

Hioki HPK3 Contractors Kit

Hioki HPK3 Contractors Kit

Hioki HPK3 Contractors Kit Different items to aide the user with Hioki HPK3 Contractors Kit Included in Kit: Voltage detector 3120 – on-Metallic Contact Voltage Detector with Battery Life Indicator that promotes safety on the worksite. AC Current Clamp Meter 3280-10F with Broad Operating Temperature Range, Attachable Flexible Sensor, and Drop-Proof Durability Non-contact Infrared Thermometer […]
Hioki HPK-1 Pro Kit